Specifying A Supply Cassette And Program Number - AGFA SelectSet Avantra Series Operating Manual

Specifying a Supply Cassette and Program Number

Once you select a supply cassette, assign a cassette program number
to it so you can use preset parameters as follows:
#
Select Supply A or B:
A
1. Press Select Supply.
B
?
2. Press Plus or Minus to highlight
the supply you want and continue.
After you select a cassette number, all parameters you change affect
that cassette. You can change or examine parameters for a cassette
that is not currently installed in the imagesetter.
You cannot assign the same cassette number to both supplies. For
example:
Cassette 1 is specified as Supply A.
You select Supply B.
You can specify cassettes 2, 3, 4 or 5 for Supply B.
You cannot specify cassette 1 for Supply B.
A
F F
#1
B ?
A
F F
#1
B ?
?
?
?
?
A B
3600
Select Cassette Program Number:
#1
The cassette number you select
is assigned to the selected supply.
Using the Imagesetter Control Panel
2400
1800
1200
dpi
1. Press Cassette Number.
2. Press Plus or Minus to
highlight the cassette
number you want.
3. Press Accept.
2–43