Overview Of Screens - AGFA SelectSet Avantra Series Operating Manual

Overview of Screens

There are six control panel screens:
Run screen — The Run screen appears if the imagesetter is ready
to image a job and the RIP is connected when you first start up
the imagesetter. A progress bar appears at the bottom of the Run
screen.
Pause screen — Press the Pause button on the Run screen to go to
the Pause screen. Icons appear at the bottom of the Pause screen
that provide access to the other control panel screens.
Note: If no media is loaded, no take-up cassette is in place, or the
bridge for on-line processing is out of position, the Pause screen
appears instead of the Run screen when you start up the image-
setter.
Startup
Run
F
#1
PL
#2
Figure 2.1 If the imagesetter is ready and a RIP is connected to it
when you start it up, the Run screen appears.
Press Pause to go to the Pause screen.
Pause
A
B
Pause
F
#1
B
PL
#2
#
Using the Imagesetter Control Panel
A
2–3