Changing The Media Savings Percentage - AGFA SelectSet Avantra Series Operating Manual

A.
T
A. Hypothetical image. —Width, 8" (203 mm).
B. As imaged media with media optimization off. —16" (406 mm)
C. As imaged with optimization on. —16" (406 mm)

Changing the Media Savings Percentage

To change the media savings percentage in the SET_M_O.ON tool:
1. Open the SET_M_O.ON PostScript file using any text editor that
can open PostScript files.
2. Scroll down to the following line of code:
0 % <== EDIT this number to change the media savings percentage.
3. Enter a different number at the beginning of this line. The sample
above shows 0 in this position. Enter any number from 0 to 100.
4. Save the file and exit the text editor.
B.
T
Figure A.1 Media optimization.
RIP and Avantra User Tools
C.
—Depth, 10" (254 mm).
A–9