Table of Contents
Advertisement
10 Output Device Mismatch
?
The imagesetter has detected a mismatch in output
devices selected.
Check to make sure that the correct take-up cassette
size called for in the cassette parameters is inserted into
the imagesetter. If this is correct, make sure that the
installation of the take-up cassette is not being
attempted while on-line processing is being requested.
Clear the error code.
If the error persists, call for service.
11 Carriage Hit End of Travel
?
Reset. Retry the operation. If the error persists, call for
service.
12 Hardware Error
Reset. If the error persists, call for service.
13 Left Side Door Open
The left door is not securely closed.
Close the door. When you clear the message, the
imagesetter resets itself.
Diagnostic and Error Messages
4–7
Advertisement
Table of Contents
