Table of Contents
Advertisement
Running Exposure Tests
Before you begin production, run and evaluate exposure tests to
determine the optimum exposure setting for each resolution. To
maintain high-quality standards, repeat this procedure at regular
intervals.
When to Image a Test Page
Image a test page:
When you first use a new imaging medium (for example, when
you first change from film to plate).
When you change emulsion batches. (The product label attached
to each case and each roll of Agfa photographic media is stamped
with a number that identifies the emulsion batch.)
When you load a new roll of media or when you replace the
chemicals in your media processor.
When you change processing conditions (new processor, different
type of processing chemicals, and so on).
At some regular interval to ensure quality control.
Note: Run separate exposure tests for each resolution setting. The
optimum exposure value varies for each one.
Running Exposure Tests
3–5
Advertisement
Table of Contents
