Selecting and Canceling Pause Pending Mode
To enter Pause Pending mode, press Pause on the Run screen
while the imagesetter is busy.
The Pause button blinks to indicate Pause Pending.
When the current job is finished, the Pause screen appears. You
can perform media operations, check parameters, etc.
Press Run to resume imaging. If jobs were left in the queue when
the imagesetter went into Pause mode, the imagesetter continues
where it left off.
To cancel Pause Pending, press the Pause button while it is
blinking. The blinking stops.
Using the Imagesetter Control Panel
2–21