AGFA SelectSet Avantra Series Operating Manual page 130

62 Media Error
The imagesetter has detected an error in the media
path.
Press Pause, then Utilities, then Feed. In most cases, this
will cause the imagesetter to display another error code.
If error 62 repeats, feed media again.
If error 62 persists, physically check the current supply
cassette to make sure that it is loaded with media.
63 Beam Compressor Jam
Hardware Error.
Reset. If the error persists, call for service.
64 Flapper Jam
Flapper is jammed.
Go to the Utility screen and press Flapper to move the
flapper. Follow the procedures given in the
Troubleshooting Media Jams chapter of this user guide.
Reset. If the error persists, call for service.
65 Media Warranty Met
Information message.
Life media warranty has been met or exceeded. Auto
dial out sends information to field service and displays
this message during the next start up.
4–20 SelectSet Avantra Series Control Panel and Operating Guide