Cleaning Avantra 20 And 25 Punch Trays - AGFA SelectSet Avantra Series Operating Manual

Table of Contents

Advertisement

Cleaning Avantra 20 and 25 Punch Trays

Check the punch trays every three months. Perform the following
procedure to empty them.
1. Turn off the imagesetter.
2. Open the left side bottom door. See Figure 5.3.
3. There are two punch trays, both below the imaging drum. They
are bright red. Slide the trays out of the imagesetter to empty
them.
Figure 5.3 The Avantra 20/25 imagesetter with the left side door open.
4.
Replace the trays, close the left side door and restart the imagesetter.
—The punch trays.
Imagesetter Maintenance
5–5

Advertisement

Table of Contents
loading

Table of Contents