Table of Contents
Advertisement
2–26
SelectSet Avantra Series Control Panel and Operating Guide
On the Job History screen:
The first line shows the number of jobs currently in the display.
Subsequent lines show the job name, then the job number.
Numbers appear with the job name to indicate the page number,
copy, and separation. These numbers are passed to the imagesetter
from the front-end application. Not all applications pass this
information to the imagesetter in the same way. This may cause
variations in the way these numbers are interpreted as you change
between different applications.
The job name does not display special characters (such as Ø or Ç)
or characters with diacritical marks (such as é or ñ). These charac-
ters are represented by a question mark (?) when the job name is
displayed on the control panel.
This function only displays jobs that are completed. Jobs that you
abort at the imagesetter control panel do not appear.
A limited number of spaces are available to display the name. The
display cuts job names that are too long starting from the left.
The most recently completed job is at the top and the oldest
completed job is at the bottom.
When the list exceeds five entries, new job names are added at the
top and older names are deleted from the bottom.
This list is cleared when you shut down or reset the imagesetter.
Tracking Lifetime Media Usage
Lifetime media usage appears in the bottom left corner of the screen
when you display Job History. This is the amount of media that has
been passed through the drum. The amount is displayed in the unit of
measurement currently specified in the Configuration screen.
Advertisement
Table of Contents
