AGFA SelectSet Avantra Series Operating Manual page 116

5 No Take-up Cassette
The take-up cassette is not in place or is not seated
correctly.
Put in the take-up cassette. If the cassette is in the media
compartment, make sure that it is seated correctly.
6 Media Jam
Go to the Utilities screen; press Feed, then Accept. If
this does not clear the error, see Unloading Media Using
the Utility Screen later in this chapter.
7 Output Side Punch Jam
Retry the operation. If the error persists, call for service.
8 Cutter in Media Path
Go to the Utilities screen; press Cut, then Accept.
4–6 SelectSet Avantra Series Control Panel and Operating Guide