Table of Contents
Advertisement
59 Processor Top Door Open
The top door in the on-line processor is open. This
message appears as an overlay on the screen that is
currently displayed on the imagesetter control panel.
The top door needs to be open when you use the
processor off-line. For example, you can process media
from another imagesetter by feeding it into the on-line
processor through this door.
If this message appears and you are not currently using
the processor off-line, check to make sure that the door
is securely closed.
The imagesetter will finish the current job but will not
image another job or advance media until the door is
closed. After you close the door, the imagesetter
automatically resumes operation.
60 Processor Communication Error
There has been an error in the flow of messages
between the processor and the imagesetter.
Reset the processor.
61 Hardware Error
Reset. If the error persists, call for service.
Diagnostic and Error Messages
4–19
Advertisement
Table of Contents
