AGFA SelectSet Avantra Series Operating Manual page 65

36.00 in
4
248.0 ft
Figure 2.15 Sample of Media-Specific Information.
—Media width. —Media thickness (in mils). —Media remaining.
Figure 2.16 Punch modes. Adjust in Cassette Screen.
These symbols are used as a convention to represent
the different punch configurations that are available.
—Punches off. —Head punches on.
—Tail punches on, Avantra 25, 30, and 44 only.
—Head and tail punches on, Avantra 25, 30, and 44 only.
F F
Figure 2.17 Alignment mode. Adjust in Configuration Screen.
—Flush left. —Centered.
Using the Imagesetter Control Panel 2–29