Table of Contents
Advertisement
A–6
SelectSet Avantra Series Control Panel and Operating Guide
User Tools that Perform
Additional Functions
The user tools listed in this section provide additional functions that
are not available at the Avantra imagesetter control panel. The only
way to use these tools is to download them to your RIP.
Filename
Description
SET_M_O.OFF
Disables media optimization.
SET_M_O.ON
Enables media optimization. (Editable tool*)
SET_V_C.OFF
Disables virtual cassette.
SET_V_C.ON
Enables virtual cassette.
SET_GANG.OFF
Disables ganging.
SET_GANG.ON
Enables ganging.
GNSP-01
Subtracts 1/10 unit from intrapage spacing.
GNSP-02
Subtracts 2/10 units from intrapage spacing.
GNSP-05
Subtracts 5/10 units from intrapage spacing.
GNSP-10
Subtracts 1 unit from intrapage spacing.
GNSP01
Adds 1 unit to intrapage spacing.
GNSP02
Adds 2 units to intrapage spacing.
GNSP05
Adds 5 units to intrapage spacing.
GNSP010
Adds 10 units to intrapage spacing.
*You can edit the SET_M_O.ON tool to specify the percentage of
media to be saved as the criteria for switching spindles. See the last
section of this appendix, Using Media Optimization, for more infor-
mation.
Advertisement
Table of Contents
