Using Accept And Cancel - AGFA SelectSet Avantra Series Operating Manual

2–8 SelectSet Avantra Series Control Panel and Operating Guide
Using Accept
Press Accept to perform a function, such as Feed, or to accept a
selection for a job parameter, such as Media Type and Media Width.
Press Cancel to cancel a requested function, such as Cut, or to cancel a
selection for a job parameter, such as Image Mode.
Special Features of the Accept and Cancel buttons:
Accept and Cancel are displayed on the Utilities screen when you
first reach it.
Accept and Cancel appear on the Cassette Setup, Feed Amounts,
and Configuration screens only after you press Plus, Plus Plus,
Minus, or Minus Minus to change a parameter.
F
17.0 in
Figure 2.4 The Feed Amounts screen. Left, before you change a parameter.
Right, after you press either —Minus Minus, —Minus, —Plus, or —Plus Plus
to change a parameter, —Cancel and —Accept appear.
and Cancel
F
17.0 in