Safety Information; Laser Information - AGFA SelectSet Avantra Series Operating Manual

1–14 SelectSet Avantra Series Control Panel and Operating Guide

Safety Information

This section provides the following safety information about SelectSet
Avantra imagesetters:
Laser information: Provides information about the laser device
used within the imagesetter and the laser radiation that it emits.
Laser safety instructions: Provide specific instructions for the safe
operation of this laser imagesetter.
General safety instructions: Provide guidelines for safe operation
of this laser imagesetter.
Sound level: Defines the sound level at the operator's position.
Safety and Compliance Labeling: Describes the safety and warning
labels that are attached to SelectSet Avantra imagesetters.
Product Compliance Standards: Lists the electromagnetic emis-
sions and safety standards to which SelectSet Avantra imageset-
ters comply.

Laser Information

SelectSet Avantra imagesetters are classified as Class I laser devices.
The maximum accessible radiation level during operation and mainte-
nance is less than Class I limits. This means that you are not exposed
to any hazardous laser radiation during operation and maintenance.
SelectSet Avantra imagesetters comply with the Code of Federal
Regulations 21CFR, Subchapter J.
Inside SelectSet Avantra imagesetters are two Class IIIb laser products.
These devices emit radiation that is considered hazardous in the Code
of Federal Regulations and international standards.
You are not exposed to this level of radiation as long as the protective
covers remain in place and interlocks are not bypassed.