Table of Contents
Advertisement
Unloading Media
When you press Unload, the imagesetter:
1. Checks for media in the take-up cassette or imaged media in the
drum.
2. Executes a feed and cut if media is detected in either place.
3. Rewinds the media in the drum back into the supply cassette.
To Unload:
Press once and the icon
flashes.
Displaying Job History
When you press Display Job History in the Pause screen, the control
panel shows a list of completed jobs.
1. Press Pause, then Display Job History.
2. Press Pause to return to the Pause Screen.
Press again to complete
unloading or...
...press Abort to cancel.
5
Job Number Five
5, 1, 1
Job Number Four
4, 1, 1
Job Number Three
3, 1, 1
Job Number Two
2, 1, 1
Job Number One
1, 1, 1
2,343.2 ft.
Using the Imagesetter Control Panel
2–25
Advertisement
Table of Contents
