AGFA SelectSet Avantra Series Operating Manual page 135

81 Vector in service
Reset. If the error persists, call for service.
82 Unknown bridge error
Reset. If the error persists, call for service.
83 Buckle in drum
Try to feed media by pressing the Feed button. If the
error persists, clear the jammed media.
84 Missing spinner index pulses
Reset. If the error persists, call for service.
85 Extra spinner index pulses
Reset. If the error persists, call for service.
Errors 100 and Above
Error messages numbered 100 and above are displayed
by diagnostic software that the imagesetter runs as it
boots (powers) up. For more information, see Boot
Errors later in this chapter.
Error messages 200 and up report bridge and buffer
problems that occur during boot up.
Diagnostic and Error Messages 4–25