Table of Contents
Advertisement
Parts of the Imagesetter
This section describes the basic components of the SelectSet Avantra
imagesetter. See Figure 1.1.
Media Compartment
The media compartment contains:
Supply Cassettes
Supply unexposed media to the imaging drum. Load them with
bulk rolls of media.
Take-up Cassette
Receives imaged media from the imaging drum. A take-up
cassette is supplied with the imagesetter for use with off-line
processing.
Cutter
Cuts media when you are ready to remove the take-up cassette to
process exposed media during off-line processing. You can
activate the cutter from either the control panel or the front end
of your imaging system.
Note: On systems equipped with the optional Avantra on-line
processor, the media transport bridge is installed in the media
compartment.
Main Power Switch
The main power switch is located at the front of the imagesetter, to
the left of the control panel. Use it to turn the imagesetter on and off.
Product Overview
1–5
Advertisement
Table of Contents
