Using Control Panel Screens - AGFA SelectSet Avantra Series Operating Manual

2–18 SelectSet Avantra Series Control Panel and Operating Guide

Using Control Panel Screens

The following topics provide information on the functions and
features of the six control panel screens used in the daily operation of
SelectSet Avantra imagesetters. The control panel screens are basically
the same for all models. The sample screens shown are Avantra 44
control panel screens. The number of icons, or their location, on your
control panel screens may differ slightly.
The following sections describe these topics:
The Run Screen
The Pause Screen
Status Icons in the Run and Pause Screens
The Cassette Setup Screen
The Feed Amounts Screen
The Utilities Screen
The Configuration Screen
Many of the functions that you perform at the SelectSet Avantra
imagesetter control panel can also be performed from your front-end
computer. Certain features of the SelectSet Avantra imagesetter, such
as media optimization, can be activated only from the front end.
For more information, see the user documentation that comes with the
PostScript Support Environment (PSE) software if you have version
11.0 of PSE. If you have an earlier version of PSE software, see the
RIP and Avantra User Tools section in this user guide. Also refer to
the documentation that comes with your RIP.