Using Plus, Plus Plus, Minus, And Minus Minus - AGFA SelectSet Avantra Series Operating Manual

Using Plus , Plus Plus
and Minus Minus
Press Plus, Plus Plus, Minus, or Minus Minus to make selections as
follows:
Plus or Minus
Use Plus or Minus to cycle through selections. When you press
Plus or Minus, the display cycles through the different selections
for a function. When you reach the last selection or numerical
value on the list using Plus, you automatically return to the
beginning of the list. When you reach the first selection or
numerical value on the list using Minus, you automatically return
to the end of the list.
Plus Plus or Minus Minus
Use Plus Plus or Minus Minus primarily to select numerical
values. When using Plus Plus or Minus Minus, you advance
through the list of selections in larger increments than if using
Plus or Minus. When using Plus Plus or Minus Minus, you do not
cycle through the parameter selections when you reach the
maximum or minimum value, or first or last option.
The Plus, Plus Plus, Minus, and Minus Minus buttons appear only on
screens where you set or change parameters.
, Minus ,
Using the Imagesetter Control Panel 2–7