List Of Error Messages And Corrective Actions - AGFA SelectSet Avantra Series Operating Manual

4–4 SelectSet Avantra Series Control Panel and Operating Guide
List of Error Messages
and Corrective Actions
This section lists all SelectSet Avantra imagesetter error messages and
provides corrective actions. The error messages are listed in numerical
order.
Some error messages apply to all Avantra imagesetters; some errors
are model specific. The diagrams in the icons for the messages that
apply to all Avantra imagesetters differ slightly for each model, but
the error message number remains the same. (For example, the
diagram of the imagesetter/processor unit in the icon for error mes-
sage 27, Processor Alarm Signal, shows the buffer area for the
Avantra 36 and 44 but does not include a buffer for the other models.)
Always use the error message number when looking up error message
information. The icons used as samples in this section are those for
the Avantra 36 and 44 imagesetters.
1 Carriage Jam
Motion of the carriage has been blocked.
Reset the imagesetter and retry the original operation. If
the error returns immediately, the carriage may be
getting caught on media in the drum. See Unloading
Media Using the Utility Screen later in this chapter.