Sound Level; Safety And Compliance Labeling - AGFA SelectSet Avantra Series Operating Manual

Sound Level

The sound level at the operator's position does not exceed 66 dB(A).

Safety and Compliance Labeling

The following warning and compliance labels are attached to the
SelectSet Avantra imagesetters:
Figure 1.2 Manufacturer's identification label, located on the rear panel.
Figure 1.3 CDRH compliance label, located on the rear panel. It reads:
Agfa Division certifies that this product conforms to all
applicable provisions of 21 CFR Subchapter J
in effect as of the date of manufacture.
abc Division
WILMINGTON, MA 01887
U.S.A.
Location
MODEL
PART NO.
SERIAL
VOLTS
AMPERES
WATTS
Hz
MFG.DATE
MADE IN U.S.A.
Wilmington, MA 01887
Agfa Division certifies that this product
conforms to all applicable provisions of 21
CFR Subchapter J in effect as of the date of
manufacture.
Product Overview 1–17