L-Acoustics K1 REFERENCE WST SYSTEM Rigging Procedures page 46

K1 K1 K1 K1
reference wst reference wst reference wst reference wst
RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES
VERSION 2.0
7. On both sides of the four landed enclosures, remove the angle R-BLP, slide in the angle arm, and put the R-BLP
into its storage location: the angle arm is locked in shipping position.
K1_RM_EN_2-0
® ® ® ®
system system system system
Figure 42: Putting the angle arm in shipping position
w w w . l - a c o u s t i c s . c o m
44 44 44 44