L-Acoustics K1 REFERENCE WST SYSTEM Rigging Procedures page 28

K1 K1 K1 K1
reference wst reference wst reference wst reference wst
RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES
VERSION 2.0
15. Select the "fix" setting on the bottom enclosure of TOWER#1 and all enclosures of TOWER#2 except on the
bottom one (see step 8).
Figure 21: Selecting the "fix" setting on TOWER#1 and TOWER#2
16. Raise the array until the K1-CHARIOT wheels are off the ground.
Note: As the array is raised all angle latches should subsequently take their locking position and a "shlack" noise
should be heard.
ALWAYS check that all inter-enclosure angles have reached their locked position by making sure
that NO yellow stickers located on the angle locking latches are visible (except on the bottom
enclosure).
WARNING
K1_RM_EN_2-0
® ® ® ®
system system system system
w w w . l - a c o u s t i c s . c o m
26 26 26 26