K1Bump-Flight Case - L-Acoustics K1 REFERENCE WST SYSTEM Rigging Procedures

5.3

K1BUMP-FLIGHT case

®
The L-ACOUSTICS K1BUMP-FLIGHT case has been exclusively designed to transport the K1-BUMP flying
structure.
The K1BUMP-FLIGHT is composed of the following elements (see also Figure 5):
•
One wheeled bottom tray.
•
Two compartments.
•
One removable tray.
•
One lid.
In its default configuration (see Figure 5), the K1BUMP-FLIGHT allows transporting 2 K1-BUMP as well as additional
accessories in the removable tray such as delta plates, adjustable slings, accessories for rigging dV-DOSC
downfill arrays, and others. The footprint is equivalent to the K1-CHARIOT's one thus facilitating truck packing.
Note: Both K1-BUMP can be hooked and lifted from the case using motors without any physical handling. The inner
cut-outs of the compartments also allow transporting cables in place of the bottom K1-BUMP.
Its modular conception makes the K1BUMP-FLIGHT ready to accept 2 additional compartments. This maximum
configuration allows transporting up to 4 K1-BUMP and the total height of the flight-case will be equivalent to the
height of an array of 4 K1 or K1-SB enclosures placed on a K1-CHARIOT.
K1_RM_EN_2-0
Figure 5: K1BUMP-FLIGHT
w w w . l - a c o u s t i c s . c o m
®
or KARA
Lid
Removable tray
Compartment
Compartment
Wheeled bottom tray
®
as
11 11 11 11