L-Acoustics K1 REFERENCE WST SYSTEM Rigging Procedures page 18

K1 K1 K1 K1
reference wst reference wst reference wst reference wst
RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES
VERSION 2.0
5. If necessary, install a third and a fourth LA-RAK onto the first ones and secure each one by repeating steps 1 to
3.
The LA-RAK touring racks must be arranged so as to properly balance the centre of gravity of the
K1-BUMP. Therefore, if four racks are used, they must be arranged in two dual-rack columns (see
Figure 11).
WARNING
A maximum of four LA-RAK can be rigged on top of the K1-BUMP.
Figure 11: Rigging a third (a.) and a fourth (b.) LA-RAK to the K1-BUMP (dos and don'ts)
K1_RM_EN_2-0
® ® ® ®
system system system system
a.
b.
w w w . l - a c o u s t i c s . c o m
16 16 16 16