Safety Warnings; Symbol Description; Important Safety Instructions - L-Acoustics K1 REFERENCE WST SYSTEM Rigging Procedures

1 1 1 1 SAFETY

SAFETY WARNINGS

SAFETY SAFETY WARNINGS WARNINGS WARNINGS
All information hereafter detailed applies for the L-ACOUSTICS
KARA-DOWNK1 rigging accessory, K1-CHARIOT cart, or K1BUMP-FLIGHT case hereafter designated as
''the product''.
1.1

Symbol description

Throughout this manual the potential risks are indicated by the following symbols:
The WARNING symbol indicates a potential risk of physical harm to the user or people within close
proximity to the product.
In addition, the product may also be damaged.
WARNING
The CAUTION symbol notifies the user about information to prevent possible product damage.
CAUTION
The IMPORTANT symbol is a notification of an important recommendation of use.
IMPORTANT
1.2

Important safety instructions

1. Read this manual
2. Heed all safety warnings
3. Follow all instructions
4. The user should never incorporate equipment or accessories not approved by L-ACOUSTICS
5. Personnel qualification
Installation and set-up should only be carried out by qualified personnel that are familiar with the rigging
techniques and safety recommendations outlined in this manual. It is recommended to attend the training
WARNING
courses offered by L-ACOUSTICS
6. Personnel health and safety
During installation and set-up personnel should wear protective headgear and footwear at all times. Under
no circumstances personnel should climb on the loudspeaker assembly.
WARNING
7. System parts and rigging inspection
All system components must be inspected before use, in order to detect any possible defects.
Please refer to the Care and maintenance section of this manual as well as any other manuals pertaining
to the system for a detailed description of the inspection procedure.
WARNING
Any part showing any sign of defect must immediately be put aside and withdrawn from use to be inspected
by qualified service personnel.
8. Additional rigging equipment
L-ACOUSTICS
L-ACOUSTICS
It is the user's responsibility to ensure that the Working Load Limit (WLL) of all additional hardware rigging
WARNING
accessories is greater than the total weight of the loudspeaker assembly in use.
K1_RM_EN_2-0
®
before proceeding with the installation of the system.
®
is not responsible for any rigging equipment and accessories that are not manufactured by
®
.
w w w . l - a c o u s t i c s . c o m
®
K1-BUMP flying structure, K1-DELTA plate,
®
1 1 1 1