Ec Declaration Of Conformity - L-Acoustics K1 REFERENCE WST SYSTEM Rigging Procedures

1.3

EC declaration of conformity

®
L-ACOUSTICS
13 rue Levacher Cintrat
Parc de la Fontaine de Jouvence
91462 Marcoussis Cedex
France
States that the following products:
Flying structure, K1-BUMP
Plate, K1-DELTA
Rigging accessory, KARA-DOWNK1
Cart, K1-CHARIOT
Flight-case, K1BUMP-FLIGHT
Are in conformity with the provisions of:
Machinery Directive 2006/42/EC
Applied rules and standards
EN ISO 12100-1: 2004 (Mechanical Safety)
DIN 18800 (Mechanical Structure)
BGV-C1 (Mechanical Standard applied in Germany)
Established at Marcoussis, France
th
November 20 , 2009
Jacques Spillmann
Head of Engineering & Design dept.
1
General standard maximum load:
-
Up to 24 K1 and/or K1-SB enclosures, 4 LA-RAK touring racks, and corresponding cable set can be
flown as a vertical line source array using the K1-BUMP structure.
-
Up to 22 K1 and/or K1-SB and 6 KARA enclosures, 4 LA-RAK touring racks, and corresponding
cable set can be flown as a vertical line source array using the K1-BUMP structure and KARA-DOWNK1
accessory.
BGV standard maximum load:
-
Up to 18 K1 and/or K1-SB enclosures, 3 LA-RAK touring racks, and corresponding cable set can be
flown as a vertical line source array using the K1-BUMP structure.
-
Up to 16 K1 and/or K1-SB and 6 KARA enclosures, 3 LA-RAK touring racks, and corresponding
cable set can be flown as a vertical line source array using the K1-BUMP structure and KARA-DOWNK1
accessory.
K1_RM_EN_2-0
1
:
w w w . l - a c o u s t i c s . c o m
3 3 3 3