L-Acoustics K1 REFERENCE WST SYSTEM Rigging Procedures page 44

K1 K1 K1 K1
reference wst reference wst reference wst reference wst
RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES RIGGING PROCEDURES
VERSION 2.0
5. On both sides of the first four enclosures, select the ''variable'' setting by pulling on the angle unlocking latch until
a click is heard.
In the "variable" setting a yellow sticker must be visible on the angle unlocking latch.
IMPORTANT
Yellow
sticker
K1_RM_EN_2-0
® ® ® ®
system system system system
Figure 40: Selecting the ''variable'' setting
w w w . l - a c o u s t i c s . c o m
42 42 42 42