HP Visualize J5000 Supplementary Manual page 169

MONITOR INFORMATION
Path Slot Head Type
---- ---- ---- ----
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
GRAPHICS(7) 7
Configuration Menu: Enter command >
To set the monitor type for GRAPHICS(7) to monitor type 8, type the following:
Configuration Menu: Enter command > monitor graphics(7) 8 [Enter]
This will take effect on the next reboot or reset of the workstation.
MONITOR INFORMATION
Path Slot Head
------------- --------- -------- ------------- ------------------ ------- -------
GRAPHICS(7) 7
The new monitor selection will either take effect the next time you reboot the workstation
if this is a non-console monitor, or immediately if this is a console monitor. The boot console
also displays the new monitor information.
Trying to change the monitor type to a number not listed for that graphics device fails and
gives you the following warning message:
Value of monitor type n out of range ( n - nn )
NOTE Changing the monitor type on an empty slot works; the monitor type will be
saved for a future graphics card.
Chapter 5
Size
--------- ---- -----
1 1 1280x1024 75Hz PCI
1 2 1280x1024 75Hz PCI, Double buffered
1 3 1280x1024 75Hz PCI, Greyscale
1 4 1280x1024 75Hz PCI, Double buffered, Greyscale
1 5 1280x768
1 6 800x600
1 7 640x480
1 8 1600x1200 75Hz PCI
1 9 1600x1200 75Hz PCI, Greyscale
1 10 1200x1600 75Hz PCI
1 11 1200x1600 75Hz PCI, Greyscale
1 12 1280x1024 72Hz
1 13 1280x1024 72Hz Double buffered
1 14 640x480
1 15 ---------- user defined -----------
HPA Resolution
1 fffa000000 1600x1200
Displaying and Setting the Monitor Type
Freq Class
75Hz PCI
75Hz PCI
75Hz PCI
60Hz
Freq Type
75Hz 8
Boot Console Handler
Class
-------
PCI
163