HP Visualize J5000 Supplementary Manual page 72

Troubleshooting
Identifying LCD-Indicated Conditions
Table 3-1. Chassis Codes for J5xxx and J7xxx Workstations
Ostat Code FRU
FLT 7611 DIMM
FLT 7612 DIMM
FLT 7613 DIMM
FLT 7614 DIMM
FLT 7800 SYS BD
FLT 7801 SYS BD
FLT 7802 SYS BD
FLT 7803 SYS BD
FLT 7804 SYS BD
FLT 7805 SYS BD
FLT 7806 SYS BD
FLT 7807 SYS BD
FLT 781s SYS BD
FLT 782s SYS BD
FLT 7840 SYS BD
FLT 7841 SYS BD
FLT 7842 SYS BD
FLT 7843 SYS BD
FLT 7844 SYS BD
FLT 7845 SYS BD
66
Message
ECC single data
ECC single ECC
ECC multipl data
ECC multpl signl
mem err summary
bus ctrl par err
bus addr par err
bus data par err
mem out of range
bus broadcst err
mem addr par err
mem ctlr stat wd
DIMM s uncor err
DIMM s corr err
unexpected HPMC
mem status invld
mem summ invalid
fwd prog invalid
mem HPMC summ wd
mem ctlr stat wd
Description
Memory ECC test failed to detect
single-bit data error.
Memory ECC test failed to detect
single-bit ECC error.
Memory ECC test failed to detect
multiple-bit data error.
Memory ECC test failed to signal
multiple-bit error.
Printing memory error summary word to
RS-232.
System bus (Runway) control parity error
detected.
System bus (Runway) address parity error
detected.
System bus (Runway) data parity error
detected.
Memory access outside configured
memory space.
System bus (Runway) broadcast error
detected.
Memory bus address parity error
detected.
Printing memory controller status word to
RS-232.
Uncorrectable ECC error detected in
DIMM s.
Correctable ECC error detected in DIMM
s.
Unexpected HPMC detected.
Memory error status word is invalid.
Memory summary word is invalid.
Memory forward progress word is invalid.
Printing memory error summary word to
RS-232.
Printing memory controller status word to
RS-232.
Chapter 3