Figure 1-11 - HP Visualize J5000 Supplementary Manual

Product Information
Rear Panel Components
Table 1-5. Audio Electrical Specifications
Frequency Response
Input Sensitivity/Impedance:
– Line in
– Microphone
Maximum Output
Level/Impedance:
– Line out
– Headphones
– Speaker (internal)
Output Impedance:
– Line out
– Headphones
Power Cord Connector
Plug the power cord into the power cord connector to provide AC power to the workstation.
The power cord provides either 15A power to the J5xxx, or 20A power to the J7xxx, at
100–120V.
The J5xxx and J7xxx workstations have different power cord connectors and power cords,
because of their differing power requirements. Figure 1-11 shows the two power cord
connectors.
Figure 1-11. Power Cord Connectors
J5xxx
power connector
28
25 Hz to 20 kHz
2.0 Vpk/47 Kohm
22 mVpk/1 Kohm
2.8 Vpp/47 Kohm
2.75 Vpp/50 ohm
5.88 Vpp/48 ohm
619 ohm
118 ohm
J7xxx
power connector
Chapter 1