Assigning Lvd Scsi Device Ids - HP Visualize J5000 Supplementary Manual

Assigning LVD SCSI Device IDs

You can determine which LVD SCSI devices are currently in use by looking under the H/W
Path heading in the output from the ioscan command discussed previously. The entry
10/0/15/1 is the built-in LVD SCSI bus. For devices connected to the built-in LVD SCSI
bus, such as disks, the number between the two decimals and after the third "/" in the
hardware path specifies the SCSI ID for that device. For example, a hardware path of
10/0/15/1.5.0 specifies a LVD SCSI device at SCSI ID 5. Here is the breakdown of the
hardware path:
SCSI device
10/0/15/1.5.0
LVD SCSI
10/0/15/1.5.0
SCSI ID 5
10/0/15/1.5.0
CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI
bus controller.
Appendix C
SCSI Connections
Assigning SCSI Device IDs
197