TP-Link T3700G-28TQ User Manual page 190

Pool Type:
IP Address:
Subnet Mask:
Binding Mode:
Client ID:
Hardware
Address:
Hardware Type:
Lease Time:
Days:
Hours:
Minutes:
Default Gateway:
DNS Server:
Netbios Server：
Specify the pool type.
Specify the IP address to be bound.
Specify the corresponding subnet mask of the IP address in
the pool.
Select a binding mode:
Client Id: Bind the IP address to the client ID.
Client Id in ASCii: Bind the IP address to the client ID in ASCII
format.
Hardware Address: Bind the IP address to the MAC address of
the client.
If you select Client ID as the binding mode, enter the client ID in
this field.
If you select Hardware Address as the binding mode, enter the
MAC address in this field.
If you select Hardware Address as the binding mode, select a
hardware type. The hardware type includes Ethernet and
IEEE802.
Specify the lease time of IP addresses in the pool.
Specify the days of the lease time of IP addresses in the pool.
Specify the hours of the lease time of IP addresses in the pool.
Specify the minutes of the lease time of IP addresses in the
pool.
Specify the IP address of the default gateway for a client.
Specify the IP address of the DNS server for a client.
Specify the NetBIOS name server. You can specify up to 8
NetBIOS servers for each DHCP server pool.
When a DHCP client uses the Network NetBIOS (Basic Input
Output System) protocol for communication, the host name
must be mapped to IP address. NetBIOS name server can
resolve host names to IP addresses.
179