Traffic - TP-Link T3700G-28TQ User Manual

The following entries are displayed on this screen:
Create MVR Group

MVR Group IP:
MVR Group Count:
Members:
Multicast VLAN Registration Group Table

MVR Group IP:
Status:
Members:
Operation:

9.3.4 Traffic

This page shows statistical information about IGMP packets intercepted by MVR.
Choose the menu Multicast→MVR→Traffic to load the following page.
The following entries are displayed on this screen:
Multicast VLAN Registration Traffic

IGMP Query:
IGMP Report V1:
IGMP Report V2:
Configure an IP multicast address on the switch or use the MVR
Group Count parameter to create a contiguous series of MVR
group addresses. Any multicast data sent to this address is sent
to all source ports on the switch and all receiver ports that have
required to receive data on that multicast address.
Specify the number of the contiguous multicast IP group
addresses.
Statically configure the ports to receive multicast traffic sent to
the multicast VLAN and the IP multicast address specified
above.
Displays the IP multicast address.
Displays the status of the multicast group.
Displays the multicast members in this group.
Click Edit to modify this multicast group's parameters.
Figure9-19 MVR Traffic
Displays the port number of the switch.
Displays the number of packets of IGMP Report V1.
Displays the number of packets of IGMP Report V2.
155