Dhcp Server - TP-Link T3700G-28TQ User Manual

Remote ID:

10.5.2 DHCP Server

This page enables you to configure DHCP Servers on the specified interface.
Choose the menu Routing→DHCP Relay→DHCP Server to load the following page.
Configuration Procedure:
1) In the Add DHCP Server Address section, select the interface type and enter the interface
ID, and then enter the server address of the interface.
2)
Click Create to specify the DHCP server for the interface.
Entry Description:
Add DHCP Server Address

Interface ID:
Server Address:
DHCP Server List

Select:
Interface ID:
Server Address:
Configuration Procedure:
Step Operation
1 Enable DHCP Relay.
2 Configure
support.
Enter the customized remote ID, which contains up to 32
characters. The remote ID configurations of the switch and
the DHCP server should be compatible with each other.
Figure 10-20 DHCP Server
Select the interface type and enter the interface ID.
Enter the DHCP server IP address.
Select the desire DHCP server item.
Displays the interface ID.
Displays the DHCP server address.
Description
Required. On the Routing→DHCP Relay→Global Config
page, enable DHCP Relay function.
Option 82 Optional. On the Routing→DHCP Relay→Global Config
page, configure the Option 82 parameters.
189