Process - TP-Link T3700G-28TQ User Manual

10.9.1 Process

Choose the menu Routing→OSPF→Process to load the following page.
Configuration Procedure:
1) Specify a Process ID.
2) Configure the router ID.
3) Click Apply.
Entry Description:
OSPF Process Config

Process ID:
Router ID:
OSPF Process Table

Select:
Process ID:
Active Router ID:
Router ID:
Status:
Figure10-47 OSPF Process
The 16 bit integer that uniquely identifies the OSPF process,
ranging from 1 to 65535.
The 32 bit unsigned integer in dotted decimal format that
uniquely identifies the router within the autonomous system
(AS).
Select the desired item for configuration. It is multi-optional.
Displays the configured OSPF process.
Displays the active router ID that is currently used by the
process.
Displays the router ID that you configured before. When you
change the router ID of a process, it will not take effect until
you restart the process.
Displays the status of the process.
Running: The process is running and its router ID has

been configured or auto selected.
Pending: The process has no router ID and cannot start.

220