Mroute Table - TP-Link T3700G-28TQ User Manual

Protocol Mode:
Protocol State:
Table Maximum
Entry Count:
Table Entry Count:

11.1.2 Mroute Table

On this page you can get the desired mroute information through different search options.
Choose the menu Multicast Routing→Global Config→Mroute Table to load the following
page.
The following entries are displayed on this screen:
Search Option

All:
Group:
Source:
Mroute Table

Group:
Source:
Incoming Interface:
Uptime:
Expires:
RPF Neighbor:
Select PIM DM or PIM SM from the radio button to set the
administrative status in the router. The default is disable.
The multicast routing protocol presently activated and
operational state of the multicast forwarding module.
The maximum number of entries in the IP Multicast routing
table.
The number of multicast route entries currently present in
the Multicast route table.
Figure 11-2 Mroute Table
Select All to display all entries.
Select Group and enter the group of desired entry.
Select Source and enter the source of desired entry.
The destination group IP address.
The IP address of the multicast packet source to be
combined with the Group IP to fully identify a single route
whose Mroute table entry.
The incoming interface on which multicast packets for this
source/group arrive.
The time in seconds since the entry was created.
The time in seconds before this entry will age out and be
removed from the table.
The IP address of the Reverse Path Forwarding neighbor.
256