TP-Link T3700G-28TQ User Manual page 295

Next BSR message
time:
Expire:
PIM SM Candidate BSR Information

Candidate
Address:
Priority:
Hash Mask Length:
11.4.4 RP
In the PIM SM mode, RP receives multicast data from the source and transmits the data down
the shared tree to the multicast group members. You must have an RP if the interface is in
sparse-dense mode, and you can manually assign static RP or config candidate RP to generate
the RP.
Choose the menu Multicast Routing→PIM SM→RP to load the following page.
The following entries are displayed on this screen:
Displays the time of next BSR message sending if this is the
elected BSR.
Displays the expiry time of the elected BSR.
BSR Displays the Candidate BSR address.
Displays the priority of the Candidate BSR.
Displays the hash mask length of the Candidate BSR.
Figure 11-21 RP Config
284