TP-Link T3700G-28TQ User Manual page 340

Choose the menu ACL → ACL Config → Extend-IP ACL to load the following page.
Configuration Procedure
1) Select an ACL ID from the drop-down list, enter a Rule ID, then specify the operation of the
rule.
2) Select and define the rule's packet-matching criteria.
Entry Description
ACL ID:
Rule ID:
Operation:
S-IP:
D-IP:
Figure 13-6 Create Extend-IP Rule
Select a Standard-IP ACL from the drop-down list.
Enter an ID number that is used to identify the rule. It cannot be the
same as the existing Standard-IP Rule IDs.
Select the operation for the switch to process packets which match
the rules.
Permit: Forward packets.

Deny: Discard Packets.

Enter the source IP address contained in the rule.
Enter the destination IP address contained in the rule.
329