Interface Config - TP-Link T3700G-28TQ User Manual

The following entries are displayed on this screen:
Multicast Global Config

Admin Mode:
Header Validation:

11.2.2 Interface Config

Choose the menu Multicast Routing→IGMP→Interface Config to load the following page.
The following entries are displayed on this screen:
Search Option

All:
Interface VLAN:
Routed Port:
Interface Configuration

Select:
Interface:
Admin Mode:
Figure 11-5 IGMP Global Config
Select Enable/Disable IGMP function globally on the Switch.
Select Enable/Disable the validation of igmp header field
Router Alert options. The fields validated for IGMPv2 and
IGMPv3 only. Regardless of whether open the validation,
TTL(Time To Live) must be 1.
Figure 11-6 Interface Config
Displays all the interface entries.
Enter the VLAN ID the desired entry must carry.
Enter the routed port the desired entry must carry.
Select the interface for which parameters is to be
configured.
The interface for which data is to be displayed or configured.
The interface administrative status. You can select
Enable/Disable the IGMP function for the interface.
262