Application Example For Pim Dm - TP-Link T3700G-28TQ User Manual
Hide thumbs
Also See for T3700G-28TQ:
- Cli reference manual (424 pages) ,
- User manual (415 pages) ,
- Reference manual (408 pages)
Table of Contents
Advertisement
Step
Operation
4
Enable IGMP
11.3.3 Application Example for PIM DM
Network Requirements
1.
Receivers receive VOD data through multicast. The whole network runs PIM DM as
multicast routing protocol.
2.
Host A and Host D act as multicast receivers.
3.
Switch A connects to Switch B in VLAN 2, connects to Switch C in VLAN 3. The Source
server connects to Switch A in VLAN 1.
4.
Host A and B connect to Switch B in VLAN 4. Host C and D connect to Switch C in VLAN 5.
5.
The VLAN interfaces connecting to hosts run IGMP protocol.
Network Diagram
The IP addresses of VLAN interfaces in each switch are displayed below:
Switch A: VLAN interface 1: 192.168.1.2/24
VLAN interface 2: 192.168.2.2/24
VLAN interface 3: 192.168.3.2/24
Switch B: VLAN interface 2: 192.168.2.100/24
VLAN interface 4: 192.168.4.100/24
Switch C: VLAN interface 3: 192.168.3.100/24
VLAN interface 5: 192.168.5.100/24
Description
Required. Enable IGMP on the routing interfaces which connect to
the receivers on Multicast Routing→IGMP→Interface Config
page.
274
Advertisement
Table of Contents
