Region Config; Instance Config - TP-Link T3700G-28TQ User Manual

8.3.1 Region Config

On this page you can configure the name and revision of the MST region.
Choose the menu Spanning Tree→MSTP Instance→Region Config to load the following page.
Configuration Procedure:
Set the name and revision level to specify an MSTP region.
Entry Description:
Region Config

Region Name:
Revision:

8.3.2 Instance Config

Instance Configuration, a property of MST region, is used to describe the VLAN to Instance
mapping configuration. You can assign VLAN to different instances appropriate to your needs.
Every instance is a VLAN group independent of other instances and CIST.
Choose the menu Spanning Tree→MSTP Instance→Instance Config to load the following
page.
Figure 8-7 Region Config
Configure the name for an MST region using up to 32 characters. By
default, it is the MAC address of the switch.
Enter the revision from 0 to 65535 for MST region identification. By
default, it is 0.
Figure 8-8 Instance Config
118