Snmp View - TP-Link T3700G-28TQ User Manual
Hide thumbs
Also See for T3700G-28TQ:
- Cli reference manual (424 pages) ,
- User manual (415 pages) ,
- Reference manual (408 pages)
Table of Contents
Advertisement
Remote Engine
Remote Engine ID:
Note:
The total hexadecimal characters of Engine ID should be even.
1.
Change the Local Engine ID could make local user and community invaild, please re-create
2.
new local users or community.
Change the Remote Engine ID could make remote user invaild, please re-create new
3.
remote users.
15.1.2 SNMP View
The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the
switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is
created for the SNMP management station to manage MIB objects.
Choose the menu SNMP → SNMP Config → SNMP View to load the following page.
Configuration Procedure:
Create an SNMP view, and configure the content of the view.
Entry Description:
View Config
View Name:
Specify the Remote Engine ID for Switch. The Engine ID is a
unique alphanumeric string used to identify the SNMP engine
on the remote device which receives informs from Switch.
Figure15-4 SNMP View
Give a name to the view for identification. Each view can
include several entries with the same name.
369
Advertisement
Table of Contents
