Vlan Vpn - TP-Link T3700G-28TQ User Manual

Configuration Procedure

Configure switch A

Step Operation
1 Configure
Link Type of the
ports
2 Create VLAN10
3 Create VLAN20
Configure switch B

Step Operation
1 Configure
Link Type of the
ports
2 Create VLAN10
3 Create VLAN20
4 Create Protocol
Template
5 Create Protocol
VLAN10
6 Create Protocol
VLAN20

7.7 VLAN VPN

With the increasing application of the Internet, the VPN (Virtual Private Network) technology is
developed and used to establish the private network through the operators' backbone
networks. VLAN-VPN (Virtual Private Network) function, the implement of a simple and flexible
Layer 2 VPN technology, allows the packets with VLAN tags of private networks to be
encapsulated with VLAN tags of public networks at the network access terminal of the Internet
Description
the Required. On VLAN→802.1Q VLAN→Port Config page, configure the
link type of Port 11 and Port 13 as ACCESS, and configure the link
type of Port 12 as GENERAL.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Port 12 and Port 13, and
configure the egress rule of Port 12 as Tagged.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Port 11 and Port 12, and
configure the egress rule of Port 12 as Tagged.
Description
the Required. On VLAN→802.1Q VLAN→Port Config page, configure the
link type of Port 4 and Port 5 as ACCESS, and configure the link type
of Port 3 as GENERAL.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Port 3 and Port 4, and configure
the egress rule of Port 3 as Tagged.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Port 3 and Port 5, and configure
the egress rule of Port 3 as Tagged.
Required. On VLAN→Protocol VLAN→Protocol Template page,
configure the protocol templates practically. The Ether Type of IP
network packets is 0800 and that of AppleTalk network packets is
809B.
On VLAN→Protocol VLAN→Protocol Group page, create protocol
VLAN 10 with Protocol as IP. Select and enable Port 3, Port 4 and
Port 5 for Protocol VLAN feature.
On VLAN→Protocol VLAN→Protocol Group page, create protocol
VLAN 20 with Protocol as AppleTalk. Select and enable Port 3, Port 4
and Port 5 for Protocol VLAN feature.
94