Standard-Ip Acl - TP-Link T3700G-28TQ User Manual

Time-Range:
S-Condition:
Rate:
Qos Remark:
S-Mirror:
Redirect:
Port:

13.2.4 Standard-IP ACL

Standard-IP ACLs analyze and process data packets based on a series of match conditions,
which can be the source IP addresses and destination IP addresses carried in the packets.
Choose the menu ACL → ACL Config → Standard-IP ACL to load the following page.
Configuration Procedure
1) Select an ACL ID from the drop-down list, enter a Rule ID, then specify the operation of the
rule.
2) Select and define the rule's packet-matching criteria.
Entry Description
ACL ID:
Rule ID:
Select the time-range for the rule to take effect.
Select S-Condition to limit the transmission rate of the data packets.
The transmission rate of the data packets. Valid values are (1 to
1000000) in Kbps.
Select QoS Remark to forward the data packets based on the QoS
settings.
Select S-Mirror to mirror the data packets to the specific port.
Select Redirect to change the forwarding direction of the data
packets.
Redirect or mirror the data packets to the specific port.
Figure 13-5 Create Standard-IP Rule
Select a Standard-IP ACL from the drop-down list.
Enter an ID number that is used to identify the rule. It cannot be the
same as the existing Standard-IP Rule IDs.
327