TP-Link T3700G-28TQ User Manual page 164

Choose the menu Multicast→MVR→Port Config to load the following page.
The following entries are displayed on this screen:
Interface Config

UNIT:
Select:
Port:
Mode:
Type:
Figure9-17 MVR Port Config
Select the unit ID of the desired member in the stack.
Select the desired port to configure MVR settings on the
specific interface. It is multi-optional.
Displays the port number of the switch.
Enable or disable MVR on this port.
Configure an port as one of the following type:
None: Non-MVR port.
Source: Configure the uplink ports that receive and send
multicast data as source ports. All source ports belong to the
multicast VLAN.
Receiver: The port where a listening port is connected to the
switch. Receiver ports cannot belong to the multicast VLAN.
153