Global Config - TP-Link T3700G-28TQ User Manual
Hide thumbs
Also See for T3700G-28TQ:
- Cli reference manual (424 pages) ,
- User manual (415 pages) ,
- Reference manual (408 pages)
Table of Contents
Advertisement
16.4.1 Global Config
On this page you can configure the LLDP-MED parameters of the device globally.
Choose the menu LLDP → LLDP-MED → Global Config to load the following page.
Configuration Procedure:
1)
Configure the number of LLDP-MED frames which will be transmitted fast.
2)
View Device Class of the device.
Entry Description:
Fast Start Count:
Device Class:
Figure 16-6 LLDP-MED Global Configuration
When LLDP-MED fast start mechanism is activated, multiple
LLDP-MED frames will be transmitted (the number of frames
equals this parameter).
LLDP-MED fast start mechanism will be activated when
LLDP-MED status changes from disable to enable. The device
will transmit a specified number of LLDP-MED frames fast then
the transmit interval will return to normal.
LLDP-MED devices are comprised of two primary device types:
Network Connectivity Devices and Endpoint Devices. In turn,
Endpoint Devices are composed of three defined Classes: Class
I, Class II and Class III. Bridge is a Network Connectivity Device.
397
Advertisement
Table of Contents
