Vlan Config - TP-Link T3700G-28TQ User Manual
Hide thumbs
Also See for T3700G-28TQ:
- Cli reference manual (424 pages) ,
- User manual (415 pages) ,
- Reference manual (408 pages)
Table of Contents
Advertisement
Max Response
Time:
Profile ID:
LAG:
Note:
Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3.
1.
When both Fast Leave feature and Unknown Multicast Discard feature are enabled, the
2.
leaving of a user connected to a port owning multi-user will result in the other users
intermitting the multicast business.
9.1.3 VLAN Config
Multicast groups established by IGMP Snooping are based on VLANs. On this page you can
configure different IGMP parameters for different VLANs.
Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page.
IGMP query message from the router port within the router
port time. The switch will no longer consider this port as a
router port and delete it from the router port table. The valid
values are from 60 to 600 seconds.
Enter the host's maximum response time to general query
messages in a range of 1 to 25 seconds.
Enter the profile ID you create to bind the profile to the port.
One port can only be bound to one profile.
Displays the LAG number which the port belongs to.
Figure 9-6 VLAN Config
136
Advertisement
Table of Contents
