TP-Link T3700G-28TQ User Manual page 115

Network Diagram

Configuration Procedure

Configure Switch C

Step Operation
1 Create VLAN6
Configure switch A

Step Operation
1 Create Private
VLANs.
2 Add
Promiscuous
port to Private
VLANs
3 Add Host port
to Private
VLANs
Description
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 6, owning Port 1/0/1.
Description
Required. On the VLAN→Private VLAN→PVLAN Config page,
Enter the Primary VLAN 6 and Secondary VLAN 4-5, select one
type of secondary VLAN and then click the Create button.
Required. On the VLAN→Private VLAN→Port Config page,
configure the port type of Port 1/0/2 and Port 1/0/4 as
Promiscuous, enter Primary VLAN 6 and Secondary VLAN 4, and
click the Apply button.
Required. On the VLAN→Private VLAN→Port Config page,
configure the port type of Port 1/0/10 as Host, enter Primary VLAN
6 and Secondary VLAN 4, and click the Apply button. Configure the
port type of Port 1/0/11 as Host, enter Primary VLAN 6 and
Secondary VLAN 5, and click the Apply button
104